8cm fan support for Solidoodle2 electronics
4
Likes
215
Downloads
761
Views
Published on November 26, 2012
Description
Support for a 8cm for the electronics board in the back of the Solidoodle 2 3D printer.
Instructions
Print both objects and glue them together. Be careful to print the cover2.stl part with the fan side (the round hole) on the bottom.
Mount the fan on the round side, and screw the other side in place of the current electronic cover.
In order for this to be installed, the spool holder has to be rotated towards a vertical position.
I suggest powering the fan from an external power supply, in order not to overload the existing one.
(Parametric files are in FreeCAD format)
Mount the fan on the round side, and screw the other side in place of the current electronic cover.
In order for this to be installed, the spool holder has to be rotated towards a vertical position.
I suggest powering the fan from an external power supply, in order not to overload the existing one.
(Parametric files are in FreeCAD format)
License
8cm fan support for Solidoodle2 electronics by rincewind is licensed under the Attribution - Share Alike - Creative Commons license.
More from rincewind
More from 3D Printer Accessories
You must be logged in to post a comment.