Galaxy Nexus stand/car dock
by Twitchy, published
Derived from this thing:
I reinforced a few sections and removed the hooks, instead replacing them with tabs at the bottom. This allows the stand to be used on any flat surface. The tabs slide nicely into a section of the dashboard of my vehicle, so it works well as a car dock also. This should be compatible with most vehicles which have a similar flat portion on their dash.
The attached STL is the only source I have, as I did the modifications as a quick job in sketchup. Sorry it's not parametric.
Print with support material, there are some decent overhangs on this thing.
I printed mine with 3 perimeters/solid layers and 50% infill, but feel free to adjust as you see fit.
Liked ByView All
Give a Shout Out
Galaxy Nexus stand/car dock by Twitchy is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Twitchy would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).