36 Pole Asymmetric Machine
by Ufopolitics, published
Recent Commentsview all
Too much to say about this one. Sorry I'm new to thingiverse, where would I find list of materials required for this item? In general its a motor depending on its power source some one might claim perpetual motion. Depending on how you orented the external and internal magnetic fields it could also be a generator. ha but if your using a standerd 3D printer where as the PLA or ABS has no magnetic field then it would do nothing. I am a big Tesla fan as well thanks for making an effort to get some info out there. With some modifications yes it can be a working device if you where to use neodinum magnets on the out side as indicated as N1,N2,N3 and S1,S2 and S3. If you wanted it to be a motor the out side fields would have to be one polarity ether all positive or negative. on the 36 interior poles you would have to create slots to slide thin bar nedinium magnets oposite in polarity of the outsde field. you would also need a hole in the center for a shaft. Basically a housing and a control mechanizum to operate on and off.
Â Hello and Thank You Fnord,
"...From looking at the picture, it may well be an electric motor/generator,
presumably with 36 poles, and presumably with some sort of asymmetry in
the rotor? ..."
Your description is impressively correct!
The main asymmetry relates to the dis-positioning of the magnetic field patterns.
The Method may look complex at first sight...but it is not.
First, it is based on Non Interconnected Coils, (not all in series or parallel, like typical Symmetry) meaning, independently energized. They are just turned on and off.
I use two levels of commutators to inject power, achieving this way an always positive above(first top commutator), always negative below (second level). As Coils are energized they either repel/attract or both interactions, self disconnecting from source...the impulse obtained deliver them to a secondary output gate at their same respective levels...but as we all know Inductors swap voltage polarities when collapsed to zero power input...and the assistance comes here from also reversing its magnetic polarity naturally within this disconnect/collapse period...
We obtain double the torque and speed over same input source, but that is not all...while rotating and rendering a mechanical energy out...it return back to us the unused energy through its output gates terminals.
Ever seen a motor that does that?
C EMF or Back EMF is no longer "negative" subtracting to power supplied...BUT Positive and added to armature power.
Hope this explanation helped you to understand it better.
Liked Byview all
Give a Shout Out
You must be logged in to post a comment.