Olympus m.zuiko 12-50mm zoom gear for Nauticam Housing
3
Likes
179
Downloads
905
Views
Published on December 1, 2012
Description
This a three-part zoom gear for this lens in Nauticam underwater housing.
Instructions
The three parts assemble on the ring as shown in the images. Once assembled you should be able to use the zoom gear to control zoom.
Note that the base is pressing on the "macro" button, so make sure that the zoom control is in the mode you want (usually "electric zoom").
These parts were designed on AutoDesk Inventor Fusion (Mac) and printed on PP3DP Up! printer.
Note that the base is pressing on the "macro" button, so make sure that the zoom control is in the mode you want (usually "electric zoom").
These parts were designed on AutoDesk Inventor Fusion (Mac) and printed on PP3DP Up! printer.
You must be logged in to post a comment.
License
Olympus m.zuiko 12-50mm zoom gear for Nauticam Housing by nirfriedman is licensed under the Attribution - Share Alike - Creative Commons license.
More from nirfriedman
More from Camera
After few tries with the housing, I decided to make the wheel gear thinner as it was a very tight fit against the port base.