Lasercut Shelf With Dividers
by Pawl, published
This shelf has 20 3"x3" slots. It can be used for safety glasses in your shop. A lasercutter is required for this design.
It has a cover, you will need a hinge for it.
It is designed for 1/8" material. So, it is probably best to use 3.2mm (1/8") wood.
Ponoko charges $48 to make this.
Lasercut all the pieces.
Glue the 4 pieces in on the left together to form the outside enclosure.
Glue the dividers together.
- Set the dividers into the enclosure.
(optional) 5. Drill holes and attach a hinge, and secure the cover.