by GeekyDad, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Keep those decks in slick sleeves from sliding all over the table!
Card holder for playing collectable card games. Will fit standard sized cards in sleeves, up to a deck of about 60 cards.
Tested at Friday Night Magic last night, works great. Only one or two people specifically asked about it, though- I guess 3d printers really are starting to become ubiquitous.
I may do an EDH/Commander sized version (100 cards), but feel free to beat me to the punch or add some improvements if you want. There's a lot of deck boxes for sleeved cards on thingiverse, but I didn't find anything that will let you casually dispense them as you play, so I designed one myself.
- Trim or sand (if necessary.)
The original version was too fragile, so I added some thickness to the bottom of the ramps and filled in some gaps. ReplicatorG gave me some errors when generating the gcode, but it printed without any issues. Done at 35% infill on a Thing-O-Matic.
Card holder by GeekyDad is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving GeekyDad a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure GeekyDad would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).