Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Small Saw Table
12
Likes
482
Downloads
1667
Views
Published on December 2, 2012
Description
This device is a small saw table for tubes, slotting, ring making eta.
Instructions
Made originally for cutting chainmaille rings. but it can be used for slitting pipes making groves in rods eta.
update: changed a few aspects around. combined some parts. trimmed up others. added the Scad file.
Parts needed:
Plastic:
2x printable_coilguid_v2.stl
2x printable_basebody_s2_v2.stl
1x printable_basebody_s3_v2.stl
Main Parts:
8 5-40 socket cap screws,
8 5-40 washers and nuts,
4 125mm x 8mm threaded rods
8 8mm Nuts,
2 608zz Barrings,
Arbor Parts: (still in progress)
1/2 Blade Arbor for 1/2 ID
1 1/4 OD 1/2ID 0.008 inch jewelers blades
4x 1/2 x 3/4 x 1/4 screw lock shaft clamps
update: changed a few aspects around. combined some parts. trimmed up others. added the Scad file.
Parts needed:
Plastic:
2x printable_coilguid_v2.stl
2x printable_basebody_s2_v2.stl
1x printable_basebody_s3_v2.stl
Main Parts:
8 5-40 socket cap screws,
8 5-40 washers and nuts,
4 125mm x 8mm threaded rods
8 8mm Nuts,
2 608zz Barrings,
Arbor Parts: (still in progress)
1/2 Blade Arbor for 1/2 ID
1 1/4 OD 1/2ID 0.008 inch jewelers blades
4x 1/2 x 3/4 x 1/4 screw lock shaft clamps
License
Small Saw Table by maxumx is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from maxumx
More from Machine Tools
You must be logged in to post a comment.