They Like It
Jigsaw Puzzle Tiles by wulfdesign is licensed under the Attribution - Non-Commercial - Share Alike license.
© 2010 by wulfdesign
Instructions
Print out in different colors or natural white. Color or draw designs with sharpies or Rit Dye blog.makerbot.com/2010/05/31/dyeing-white-abs-parts/ them to whatever color you want. Version 0.2 pieces are currently only 30mm x 30mm x 1.5mm high for quick printing but can be easily scaled up to the thickness you want. Join the together in anyway you like to create shapes, letters, names, etc.
This Version 0.2 should interlock without much play in them. But may depend on how well your machine is calibrated and it\'s skeinforge settings. Once I tightened up my X and Y axis everything started interlocking better.
I\'ll include Rhino3d source and STEP output a bit later. As well as SVG/DXF if you have access to a laser cutter. (if you do I\'d really like a set).
[UPDATE: July 30th 2010 - nope the tolerances are too close for the pieces to interlock without jamming or forcing them when using the default settings with the new RepG v18. I've gone back and pulled another 0.0625mm off the sides and made them thicker (5mm) so they hold together easily but need to re-upload that version after some more testing.]
