by dhartnoll, published
A simple heart trinket to give to the one you love. Can be plain or with optional initials (see photos).
Print using the .stl file here for plain hearts or use the provided .scad file to add initials.
My first attempt at printing this upright failed because one of the hearts toppled over during the print. The attempt in the photos was printed with the hearts laying flat but that caused lots of support material to fill the hollow interiors. With perseverance, I think better results would be obtained by printing upright.
The trinket in the photos was printed on my UP! mini. In the photos, the trinket looks quite grainy where the print layers can be clearly seen. You'll have to take my word for it, but it looks nowhere near this rough 'in the flesh'.
Liked ByView All
Give a Shout Out
Hearts Trinket by dhartnoll is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure dhartnoll would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).