Celtic Cross Necklace/Tree Ornament/Jewelry Piece
48
Likes
852
Downloads
2560
Views
Published on December 4, 2012
Description
This is a Celtic Cross that can be used as a tree ornament, jewelry, or anything really as it has a small hoop at the top.
Instructions
200mm so scale to fit your needs and this should be able to be made using a CNC as well. Basically you can use a 3D Printer or a CNC so you have even more machine and material choices.
For the ultimate way of doing this (if you do not have a CNC, and only have a 3d Printer (like a Makerbot/RepRap)) -> youtube.com/watch?v=AS7eJw0Im_c&list=UL
I would suggest no greater than a .4mm nozzle and really a .35mm or .25mm is better due to the intricate pattern work.
edit: 12/30/2012 I have added a lower poly count version for those who may have had issues with the higher poly count version. I didn't with 8 gigs of ram and Cura but some have with other confiugurations (1 or 2 gigs of ram) and other slicing programs (slic3r).
For the ultimate way of doing this (if you do not have a CNC, and only have a 3d Printer (like a Makerbot/RepRap)) -> youtube.com/watch?v=AS7eJw0Im_c&list=UL
I would suggest no greater than a .4mm nozzle and really a .35mm or .25mm is better due to the intricate pattern work.
edit: 12/30/2012 I have added a lower poly count version for those who may have had issues with the higher poly count version. I didn't with 8 gigs of ram and Cura but some have with other confiugurations (1 or 2 gigs of ram) and other slicing programs (slic3r).
You must be logged in to post a comment.
License
Celtic Cross Necklace/Tree Ornament/Jewelry Piece by DarkAlchemist is licensed under the Attribution - Non-Commercial - Share Alike license.
More from DarkAlchemist
More from Jewelry
Hola tengo una imodela, se puede hacer esto con imodela. gracias.un saludo de barcelona
Hola, nunca he oído hablar de un imodela antes de que acaba de mencionar. Por lo tanto, la impresora no tenía ningún problema con esto? Si imprimió le podría publicar en el "Hice un" botón?
Gracias.