Transmission hex wrench adapter
by Reuben, published
After making Emmett's transmission model, my gears were pretty stiff. I made an adapter so I could exercise the gears using a hex wrench.
This thing will use a 10mm hex wrench to turn the gears.
Print and loosen 10mm well using a 10mm wrench or trim/sand if needed.
Liked ByView All
Give a Shout Out
Transmission hex wrench adapter by Reuben is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Reuben would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).