Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Digimon Tag and Crest

by truehybridx, published

Digimon Tag and Crest by truehybridx Dec 5, 2012

Thing Info

5276Views 1059Downloads
Report Thing


Original Design by The Pixel Pot Project by WeIrDiE_InC from Trimble 3D Warehouse (Google Sketchup Warehouse)

Currently the Tag and Crest don't quite fit together :/

I'm going to play with it in OpenScad and maybe make the pieces fit together better, unless someone beats me to it.

Would like to keep as two pieces for painting, but whatever happens happens

Tags and Crests the Digidestined were after in Season 1 to make their Digimon more powerful....

Sketchup File Provided for tweakers who wanted more than the STL


Print using 10% or less Infill
The pictured are using 2 Shells/Perimeters

Edit to have the crest design you want.
Print as you did above

Thing Info

5276Views 1059Downloads
Report Thing

Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Sanded down the bottom edge of the crest and ended up breaking a thin layer off the tag upper over hang and the crest now slides in and out with a medium amount of resistance. Also cut the nub on the tag and cut a channel for the reshaped nub on the crest