Wood Plug, +1
by zheng3, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Conceal screws with panache.
This plug hides a 3/8" countersunk screw when printed at 100% scale.
Blue PLA ironically draws attention to the concealment.
Drill a 3/8" countersink for your screw. I used a spade bit for this.
Snap the plug and boss together, and insert the plug into the countersink.
Upgrade this Thing with Thingiverse AppsTools and Utilities
Repair, slice, or enhance this Thing
Wood Plug, +1 by zheng3 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving zheng3 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure zheng3 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).