Camcorder pan/tilt support v2
11
Likes
311
Downloads
1356
Views
Published on December 5, 2012
Derived from
Camcorder pan/tilt support
by knighster35
Description
The full and modified pan/tilt support for a light camcorder.
Evolution is pan and tilt modules are made of 3 parts to assemble with screws.
Evolution is pan and tilt modules are made of 3 parts to assemble with screws.
Instructions
You must use screws to assemble the whole part.
Pan parts and tilt parts must be screwed alltogether to make the pan and tilt modules.
Motor support and motor fix must be screwed to the pan module.
Motors are model Igarashi 20G-50 and Igarashi 20G-150
PS: sorry for my english
Edit: I have uploaded the sketchup file. I don't have time to split all my part in a print3D
Pan parts and tilt parts must be screwed alltogether to make the pan and tilt modules.
Motor support and motor fix must be screwed to the pan module.
Motors are model Igarashi 20G-50 and Igarashi 20G-150
PS: sorry for my english
Edit: I have uploaded the sketchup file. I don't have time to split all my part in a print3D
You must be logged in to post a comment.
License
Camcorder pan/tilt support v2 by knighster35 is licensed under the Attribution - Share Alike - Creative Commons license.
More from knighster35
More from DIY
great, but unlike grabcad where people cheer each other on for uploading random stuff, thingiverse is for 3d printing, not something that can be done with that .stl upload the source file so people can place the parts so they CAN be printed, or arrange the parts so before you export to .stl
It's hardly ever possible to reverse-import an .stl file
Use the second STL file. All parts are put on the same plane.