Power supply mount for Prusa Mendel
13
Likes
160
Downloads
1253
Views
Published on December 9, 2012
Description
It is a simple mount for attach a Tacens power supply ( tacens.es/fuentes_de_alimentacion/fuente_de_alimentacion_radixeco400.html ) to your prusa mendel.
It allows to have a more compact and handy printer.
My prusa mendel is a little bit more large at the X axis, and I had to move the center of the Y carriage to avoid the belt not touch the power supply.
More info in spanish:
paclema.blogspot.com.es/2012/12/guarda-le-fuente-bajo-tu-prusa.html
It allows to have a more compact and handy printer.
My prusa mendel is a little bit more large at the X axis, and I had to move the center of the Y carriage to avoid the belt not touch the power supply.
More info in spanish:
paclema.blogspot.com.es/2012/12/guarda-le-fuente-bajo-tu-prusa.html
Instructions
Print 2 times the mount.stl and assemble it.
You will need:
*Four M4x10 screew.
*Two M3x15 screew.
*Two M3 nut.
*Four M3 washer (optional).
You will need:
*Four M4x10 screew.
*Two M3x15 screew.
*Two M3 nut.
*Four M3 washer (optional).
License
Power supply mount for Prusa Mendel by paclema is licensed under the Attribution - Creative Commons license.
More from paclema
More from 3D Printer Parts
You must be logged in to post a comment.