Mr. Ona Bona Windup Walker
by AMS3000, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Another windup walker toy named by my son.
Based off the wonderful template ( https://tinkercad.com/things/06jDIkSXfX4-windup-walker-clothes ). The mechanism is the awesome Makerbot one ;)
As with most my stuff, Mr. OnaBona was made using Tinkercad. Grab it / Edit it / Remix it as you see fit: https://tinkercad.com/things/1CwPXbxTaWt
I printed it in natural ABS on my Printrbot with 0.2mm layer height, 15% infill. I slowed it down a lot too, to minimize vibrations during infill.
I bought many of the mechanisms from Makerbot - they are so much fun! You can grab some for a few bucks here: http://store.makerbot.com/windup-walkers.html
Mr. Ona Bona Windup Walker by AMS3000 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving AMS3000 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure AMS3000 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).