Screw Top Container
by rkelley, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a simple cylindrical container that has been threaded to accept a threaded cap. I does print and it does work. I printed several on a Makerbot Replicator.
I printed this with the standard MakerWare settings for a single extruder Makerbot Replicator.
Slicer: Miracle Grue
Layer height: 0.27mm
Number of shells: 2
Extruder Temp: 230
Platform Temp: 110
Speed while extruding: 80
Speed while traveling: 100
UPDATE I accidentally uploaded a container without a bottom. I have since uploaded the correct file. Sorry about that.
Screw Top Container by rkelley is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving rkelley a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure rkelley would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).