Shower Door Lock
by Jerrill, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
If you have a toddler who loves to open the shower door on you, then print a lock for the door! The odds of this fitting your exact handle are slim, but hopefully it'll get you started on designing your own.
Print the shower-door-insert-flipped.stl first. Then insert it into shower-door.stl (circular tabs down into the corresponding recesses) a few layers after if finishes printing the groove that the shower door handle slides into. The next layers will lock the insert into place and you won't have to worry about any tricky bridging.
Shower Door Lock by Jerrill is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Jerrill a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Jerrill would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).