Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

ToolBox for Prusa mendel

by paclema, published

ToolBox for Prusa mendel by paclema Dec 9, 2012

Description

This is an useful thing to make for your 3D printer Prusa Mendel. With this thing you can save your tools safe and ready to use. If you have to move your printer to another place, you can carry everything in one place without forgetting where you left.

NOTE: This box is designed to a prusa mendel with a little bit more large at the X axis, but you can mount this box to a standart prusa just taking a little out the box to the frame.

More from 3D Printer Accessories

view more

Liked By

view all

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

You have to print: Base.stl Tapa_logo.stl Cajon.stl Two monturaM8rod_1.stl *Two monturaM8rod_2.stl

Then you have to assemble Base.stl and Tapa_logo.stl with this elements per hole (there are 4 holes):

  • M4x55 threaded rod Four M4 nuts Four M4 washers (optional)

To mount the box to the threaded M8 rod, you will need in total: Four M3x15 screws Four M3 nuts *Four M3 washers (optional)

To make an handle for the box, you need: M3x15 screw Two M3 nuts

Top