Flat-pack Chess Set
by FAR, published
Two versions in DXF meant to be cut from 6mm sheet stock--one with hard corners and one with a gentle fillet. Each 12"x24" sheet layout makes one complete set. An STL file is also included to aid in assembly. This Thing was designed at FAR by Chad Eby. Photos coming soon!
Please see the 3D .STL file for the way the pieces go together. The fit is not extremely tight, but assembling the top parts of each piece first (with a little wood glue if you are using 6mm ply) and then pushing the assembly down onto the base seems to work well.