Great Printer Hook, Cleaned & Updated
by Komb, published
Now Supports BotFeeder and other 84mm wide spools.
Still needs most of a 200x200mm bed to print. I DO print the Prusa version on my Prusa.
Still holds common 1kg spools, Pictured 1.5kg spools and EckerTech 2kg spools.
Still recomending filament guide.(thing:16267 V4) or (thing:62387)
Scad file still makes all versions Plus new 15x15 extrusion mount:
Set spacer=3 for 15x15 extrusion mount.
Set spacer=2 for Prusa clip-on hook.
Set spacer=1 for EcksBot intigrated hook. Replaces spacers.
Set spacer=0 for EcksBot clip-on hook. Clips onto spacers
Now available pre-printed at gkprotoforms.ca
- Select .stl for your printer or generate one from .scad file.
- Slice and print. Hex fill recomended for strength.
- Attach to printer.
- Load spool.
- Print stuff.
If 2 fails, order from gkprotoforms.ca :)
Liked ByView All
Give a Shout Out
Great Printer Hook, Cleaned & Updated by Komb is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Komb would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).