CO2 Tank Handle
by nzbrock, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a replacement tank handle/knob for a 10lb C02 tank. The square hole measures 5/16" of an inch.
Scale the part to fit the square nut on your tank valve. Mine measured 5/16" of an inch.
CO2 Tank Handle by nzbrock is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving nzbrock a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure nzbrock would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).