Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
10mm X Ends for any X Carriage
12
Likes
286
Downloads
1935
Views
Published on December 13, 2012
Description
These are based off of the popular Kühling's X ends (18384) but have been modified to work with RichRap's quick-fit x carriage (19590) as well as mine (37675). These should fit any x carriage, if not let me know what needs to be corrected and I will fix it.
The only issue I had with Kühling's X Ends was that I would not be able to use them for my X Carriage due to the belt clamps being 7.2mm further off of the axis. Instead of shifting the weight of the stepper motor 7.2mm further off to the side, I decided to place it behind the Z Rod to help center it's weight.
The only issue I had with Kühling's X Ends was that I would not be able to use them for my X Carriage due to the belt clamps being 7.2mm further off of the axis. Instead of shifting the weight of the stepper motor 7.2mm further off to the side, I decided to place it behind the Z Rod to help center it's weight.
Instructions
print and enjoy!
This is for threaded rod or Techpaladin leadscrews
I have not printed these yet. If you do, let me know how it works and I will take off the work in progress or make changes.
This is for threaded rod or Techpaladin leadscrews
I have not printed these yet. If you do, let me know how it works and I will take off the work in progress or make changes.
You must be logged in to post a comment.
air1
on
January 19, 2013
said:
I'm ready to make these, but I noticed that the servo mount nuts are on the wrong side.
RichRap
on
December 13, 2012
said:
Nice job, they look funky :) I'll have to print a set of these, but at the moment I'm still using 8MM smooth rods and 10mm leadscrews.
Wired1
on
December 13, 2012
said:
Yes you've built exactly what I was thinking about, if this works you've saved me the trouble thanks :)
License
10mm X Ends for any X Carriage by mnadamn is licensed under the Attribution - Share Alike - Creative Commons license.
More from mnadamn
More from 3D Printer Parts
Thanks for the update. I'm printing it now.
Sounds great, let me know how it goes.