Diffuser for Bicycle lights
by Gyrobot, published
This is an add on for the front of a round torch style light to help diffuse some of the forward light sideways. This is a great feature when using a torch as a bicycle's front light and enables visibility from the side. A great safety aid in these dark winter mornings and nights.
The diffuser has been designed for my 35mm diameter torch. Just scale accordingly for the diameter of your torch, tip: wrap sticky tape around the diameter of your torch to increase it's diameter if required.
Print in white, natural, pearl etc for forward facing bicycle lights.
I printed without support because my printer bridged successfully between the four webs as the inner core started to be printed, however a raft was used to help the thin walled section adhere to the bed.
Liked ByView All
Give a Shout Out
Diffuser for Bicycle lights by Gyrobot is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Gyrobot would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).