by zheng3, published
Use this hook to hang your stocking by the chimney with care.
No assembly necessary. Just print the hook once, the plug twice, and then affix to a wall with drywall screws. Insert the decorative plugs to hide the screw heads.
The overhang is just at the end of what I can print without support. It may warp a little bit, but it tends to warp towards the wall where you can't see it.
Printing at 1:1 will make a sturdy hook in ABS, but will muddy the details a bit. The photo is a 1:1.5 print.
Flagrant stagecraft alert: although it is fairly fancy, the Hook, +1 is incapable of levitation. It's taped to a piece of acrylic for the photo.
Liked ByView All
Give a Shout Out
Hook, +1 by zheng3 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving zheng3 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure zheng3 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).