Solidoodle - GoPro Mounting Plate
by DavidRiesenberg, published
A mounting solution for attaching GoPro cameras to the Solidoodle printer (gen 2). The plate can be latched to either the top front frame or the side front side frame. Makes taking videos or timelapses of the building process easier.
There are two versions available:
Screw mount - Allows you to attach the GoPro to the plate using standard M5 GoPro screws. A nut is required.
- Slide / Snap mount - Allows you to the attach the GoPro to the plate using the standard GoPro snap legs. Same as with the standard mounts.
- The snap mount is a work in progress. Need to tweak the dimensions a bit.
Both versions are supplied in two formats.
One is a complete, solid assembly that can be printed in one piece. It requires printing with support material but should be a bit sturdier.
The second version is with the plate and mount(s) in different files for separated printing. This requires attaching them together with acetone.
Sample footage using the mount: http://vimeo.com/gingerskull/gopro-solidoodle-mount-test
UPDATE: Added the slide mount. As with the first version, there is a standalone mount and a combined mount.
NOTE: I made this for the Solidoodle 2 frame. I don't know if the original Solidoodle or the upcoming Solidoodle 3 have the same frame dimensions or not.
Just print and have fun filming your creations.
If you opted for the two-part solution - use acetone to bind the mount to the plate.
Both mounts can use the same plate. Indentations on the plate allow for easy center-positioning.
Liked ByView All
Give a Shout Out
Solidoodle - GoPro Mounting Plate by DavidRiesenberg is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving DavidRiesenberg a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DavidRiesenberg would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).