Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Raspberry Pi Screw Mounting Plate
10
Likes
147
Downloads
2688
Views
Published on December 15, 2012
Description
A Raspberry Pi mounting plate which contains screw posts for attaching to V2 Raspberry Pi's .
Instructions
I wanted to mount my Raspberry Pi to my RepRapPro Mendel. However the previous mounting plates relied on clipping onto the edges of PCB. Now with the V2 Raspberry Pi we have mounting holes! I hope someone finds this as useful as I did!
To attach to a Mendel's frame I used the PCB Clamps found on:
thingiverse.com/thing:20968 (pcb-clip-4off.stl)
This is my first design so be gentle! If anyone has any suggestions please let me know!
N.B I found that due to the small size of the screw holes I had to drill out the posts with a 2mm drilll bit. I will be updating this design so this wont be needed!
To attach to a Mendel's frame I used the PCB Clamps found on:
thingiverse.com/thing:20968 (pcb-clip-4off.stl)
This is my first design so be gentle! If anyone has any suggestions please let me know!
N.B I found that due to the small size of the screw holes I had to drill out the posts with a 2mm drilll bit. I will be updating this design so this wont be needed!
Collections
Stuff to print when I finish my 3d printer
by cgapeart
Things to Make
by blixtberg
Things to Make
by goranche
License
Raspberry Pi Screw Mounting Plate by Fenderstratmat is licensed under the Attribution - Share Alike - Creative Commons license.
More from 3D Printer Accessories
You must be logged in to post a comment.