Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Stackable Box System for Screws and Nuts
by e-nozzel, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Remixed with new Features and box sizes:
Intend to organize screws. Take 1-2-3 through the front or dump out a Hand full on the back of the box...
Box on pics is filled with 500 Screws M3x12mm.
i have to replace the wall in the middle for nuts, spacers and longer/bigger screws. will upload some more boxes wich fit in the System soon...
the stand has holes for wallmount, but this Version is not stiff enough to hold more than 1-2 boxes if filled with heavy stuff like screws. update for wallmount with stiffer design also comming soon...
i´ve added small boxes with 2 and 3mm Slots V2. (removed 2-7mm boxes from yesterday cuz they didn´t fit exactly at the back and need Support for the slot)
This versions are good for M3 Spacers and M3 Nuts.
Added: V2 of 4, 5, 6 and 7mm Sloted Boxes and the more stable wallmount Version of the stand. (not printed yet but slices nice in slic3r)
Added: Box Big Version
Added: Stand_Wallmount_Duo.stl <- Stand for 2 boxes, rigid, wallmountable and with holes (2xM3) to connect more Units in a row.
Added: Light Version of the dual stand, use it if you dont need wallmount and reduce print time/material
Added: ‘Box_very_small.stl’ and ‘Box_very_small_nose.stl’
Added: "Box1_with_label_insert.stl" and "Box_BIG_with_label_insert.stl"
Made for 20x40mm Paper Labels
Box has 2mm walls. i printed it with 3perimeters 0.4mm Layerheight, 0.49mm Extrusion width, 2 bottom & 2 top layers, 0.3 infill.
printed with prusa i2 and slic3r
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Stackable Box System for Screws and Nuts by e-nozzel is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving e-nozzel a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure e-nozzel would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).