Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
strechy caterpillar track
12
Likes
458
Downloads
1035
Views
Published on December 15, 2012
Derived from
Printable caterpillar track
by carlosgs
Description
a derivative of thingiverse.com/thing:37104 with a more understandable scad code and more possibility
- get a bigger tooth each X teeth (for bettre grip on snow or mud)
-possibility of multiple wheels print for more stable large track (as for skidoo)
- get a bigger tooth each X teeth (for bettre grip on snow or mud)
-possibility of multiple wheels print for more stable large track (as for skidoo)
Instructions
print the track as 0.5mm wide no infill no top or bottom layer
print the wheel whith 3 perimeters 3 layers top and bottom, 0.2 infill
the same whith the frame
the frame is ready to use these servo: pololu.com/catalog/product/1248 and is ajustable to get the track with the correct tension
you may need to add an external idler if you use another servo with no ball bearing; i will work on it anyway
work well with slic3r
print the wheel whith 3 perimeters 3 layers top and bottom, 0.2 infill
the same whith the frame
the frame is ready to use these servo: pololu.com/catalog/product/1248 and is ajustable to get the track with the correct tension
you may need to add an external idler if you use another servo with no ball bearing; i will work on it anyway
work well with slic3r
License
strechy caterpillar track by jfpion is licensed under the Attribution - Share Alike - Creative Commons license.
You must be logged in to post a comment.