cubic on point infill test
by dmorfin, published
This is a test print for a cubic infill. The cubes used for the infill are arranged on-point so that they can easily be printed. An example support structure is also included.
This was designed with a 0.3 mm layer height in mind on a 0.5 mm nozzle. The scad file allows for adjustment of various parameters
Liked ByView All
Give a Shout Out
cubic on point infill test by dmorfin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dmorfin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dmorfin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).