Shim for One2Flush dual-flush toilet system
by delsydsoftware, published
The One2Flush dual-flush system is really great, but I ran into a problem when I installed it on my toilet. The system does a half flush when you pull the toilet handle down, and it does a full flush when you pull the handle up. Unfortunately, the ancient Universal-Rundle toilet in my house has the lever mounted very close to the top of the toilet tank. I wasn't able to pull the lever up to engage the full flush without hitting the top of the tank.
So, this is a shim that moves the handle out enough to allow the handle to clear the top of the toilet tank.
Print this out with 25% infill, preferably in a color that matches your toilet. :)
Liked ByView All
Give a Shout Out
Shim for One2Flush dual-flush toilet system by delsydsoftware is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure delsydsoftware would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).