Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Accustic Guitar Pick Up/Holder, Now on Customizer

by thecharacterg, published

Accustic Guitar Pick Up/Holder, Now on Customizer by thecharacterg Dec 17, 2012

Featured Thing!

Description

thingiverse.com/apps/customizer/run?thing_id=38220&code=1732576338830e15ebbd98773f2c6420

i gotten a Mitchell Guitar for my 40th birthday, and need a pickup to use it with an amp, So enter a 3d printer and some 8m 32 screws and a 1/4 female plug from Radio Shack.

The design is just standardised, but will be changing to being a complete kit for building your own pickup.

Recent Comments

view all

More to the point, this takes any passive single coil windings. using measurements,

Awesome! Can you provide some details about how you did the wiring? I believe you have to wind these, is that correct? Thanks!

I am working on making a pickup as well, and making one for my bass as well, but that has a pickup already in it.

More from Music

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

updated to Customizer, but working on fixing size limits. go to:
thingiverse.com/apps/customizer/run?thing_id=38220&code=1732576338830e15ebbd98773f2c6420

Well not to hard to follow instructions, except i have hard time making them. This does fit 99mm sound ports and it quick to assemble, after printing the parts.

You will need to print two side pieces, then print both the top and back.
Losen the slack on your stings, to get this by.
Place the one coil pickup in the top, then place the bottom on and screw it down. place on side piece on top of another one as to shim the piece to the top with out blocking screw holes and screw one piece on.
Now work the piece through the strings in to the guitar.

Update, The Side Pieces are now one piece to print
as of Christmas, i wont be removing anymore of the stl files. Since there maybe a style change that other won't agree with.

The Scad IS setup up for Customerizer SO, I can't figure out how to add it to work!

Comments

You must be logged in to post a comment.

stephencwelch on Mar 30, 2013 said:

Awesome! Can you provide some details about how you did the wiring? I believe you have to wind these, is that correct? Thanks!

thecharacterg on May 3, 2013 said:

More to the point, this takes any passive single coil windings. using measurements,

thecharacterg on Dec 19, 2012 said:

I am working on making a pickup as well, and making one for my bass as well, but that has a pickup already in it.

Top