by MadBee511, published
It's not a 3 star..no 4 star...it's a 5 star.
This star can go over the christmas lights already in the tree.
Print with clear PLA or ABS.
On the UP mini with PLA the settings where
Normal, Bighole 0.30mm
With ABS it's Normal, Bighole, 0.25mm
I printed with ABS at 0.30mm, then there is some space inbetween to let some more light through. Maybe this was coincidence and it's also brittle then. Be sure to let it cooldown before removing support. Cooling down is not needed when printing in PLA. I don't have much colored ABS nor PLA. Please show the 3D world what you made!
In the photo where there are two stars, left is PLA, right is ABS
Liked ByView All
Give a Shout Out
5Star by MadBee511 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure MadBee511 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).