Loading

Duck Call

by jamesarm97, published

Duck Call by jamesarm97 Dec 19, 2012

Description

This is a fully printable duck call. My son wanted one and I could not find anything here but searching the web I found these files on GrabCad which worked. This was designed by Doug Lanter RackEmCalls.com

Original Source:
grabcad.com/library/duck-call

Recent Comments

view all

Use a k-cup and it works great!!!!!!!!!!!

It holds or wedges the reed in place.

Quick question, where does the wedge go?

More from Sport & Outdoors

view more

Liked By

view all

Tags

License

Duck Call by jamesarm97 is licensed under the Creative Commons - Attribution license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Print one each of the files. I printed in PLA so the parts would fit together better (no shrinkage). The reed even printed and worked. I printed all at .20mm Layers and 20% infill and 3 shells except the Reed which was printed at .10mm layers because it was thin.

I had to scale the image up and it could probably use enlarging just a tad.

Comments

You must be logged in to post a comment.

Spencer1612 on Apr 16, 2014 said:

Use a k-cup and it works great!!!!!!!!!!!

Spencer1612 on Apr 16, 2014 said:

Quick question, where does the wedge go?

jamesarm97 on Apr 16, 2014 said:

It holds or wedges the reed in place.

SomeRandomRobot on Nov 28, 2013 said:

I was having troubles with getting the reed to sound right so i replaced it with picture paper and had a piece on top and bottom of the wedge. Thanks this duck call has helped me bring in more ducks than my $80.00 duck call i bought last year!!!

jamesarm97 on Nov 28, 2013 said:

That's very cool

Mysabre73 on Aug 20, 2013 said:

I couldn't get the reed to sound right so I used an old K-Cup and cut one from there. Once I trimmed it to size I was able to call in a few ducks. Great file! Thanks for bumping it over from GrabCad!

scooter46290 on Jul 21, 2013 said:

This works great. I printed in ABS. I didn't use any scaling.

I didn't think it would make noise.

You don't need the "Ring_fixed.stl" it was tight and didn't fit anyway. This looks like a decorative piece.

jamesarm97 on Jul 22, 2013 said:

Cool. Yes, the ring is just decorative. You can change the sound some if you need to by cutting or shaping the reed piece.

Top