gingerbread thing (Lebkuchenglocke) for 7 cm wafer
by jalr, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a little helper thing for baking gingerbread. It brings the dough in shape so you can easily put it on the wafer.
Print the four parts. Maybe the rotator is a little bit difficult. I printed it in 0.05 layers with my ultimaker.
I also have attached a very tasty recipe.
openscad file is attached but very ugly.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
gingerbread thing (Lebkuchenglocke) for 7 cm wafer by jalr is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving jalr a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jalr would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).