Skeleton Dock iPhone 4s with Casemate Pop ID Case
0
Likes
60
Downloads
554
Views
Published on December 19, 2012
Description
This is a modified version of thingiverse.com/thing:23339 (Thanks again for the STEP file inventworld)
I modified it for using a Case-mate pop ID case (http://www.case-mate.com/iPhone-4-Cases/Case-Mate-iPhone-4-4S-Pop-ID-Cases.asp)
I also modified it to use aftermarket 30 pin cable to fit the usb cable through the opening. I also opened up the 30 pin area as it was a bit snug.
I have not built this version. I thickened the walls on the top back 2 corners as the thinner walls did not build properly but the dock is still functionally perfect. it should build ok now, though as I doubled the wall thickness from what I built last night
I modified it for using a Case-mate pop ID case (http://www.case-mate.com/iPhone-4-Cases/Case-Mate-iPhone-4-4S-Pop-ID-Cases.asp)
I also modified it to use aftermarket 30 pin cable to fit the usb cable through the opening. I also opened up the 30 pin area as it was a bit snug.
I have not built this version. I thickened the walls on the top back 2 corners as the thinner walls did not build properly but the dock is still functionally perfect. it should build ok now, though as I doubled the wall thickness from what I built last night
Instructions
I sliced with slicer 97 and built with Solidoodle 2 ABS with no support.
License
Skeleton Dock iPhone 4s with Casemate Pop ID Case by jemmicat is licensed under the Attribution - Share Alike - Creative Commons license.
More from Mobile Phone
You must be logged in to post a comment.