Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
#Iphone 5 Brodit carkit mount
4
Likes
695
Downloads
2976
Views
Published on December 21, 2012
Derived from
griffin car adapter / iPhone5 adapter
by scanner
Description
The goal is to connect the Iphone 5 to a Parrot mki 9200 while its been placed in this mount and to attach the mount to the dasboard via a Brodit swivel mount.
Because the mki has an old 30 pins iphone connector you need a 30 pin to lightning adapter. The adapter can be secured in the mount.
Design has not been tested yet, probably needs some itteration. But feel free to try it out.
Because the mki has an old 30 pins iphone connector you need a 30 pin to lightning adapter. The adapter can be secured in the mount.
Design has not been tested yet, probably needs some itteration. But feel free to try it out.
Instructions
-print parts
-secure adapter in the mount with to small screws
-screw the swivel mount to the back of the mount and secure it to the dashboard
-place phone in the mount
-plugin the 30 pins cable of the mki to the adapter
-secure adapter in the mount with to small screws
-screw the swivel mount to the back of the mount and secure it to the dashboard
-place phone in the mount
-plugin the 30 pins cable of the mki to the adapter
License
#Iphone 5 Brodit carkit mount by D3rax is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from D3rax
More from Mobile Phone
Sure, the files are in inventor fusion format. I will upload them shortly. Do you have some pictures of the print result?