Parametric Cable Hook / Hanger
3
Likes
172
Downloads
606
Views
Published on December 23, 2012
Description
Single rounded hook / hanger for hanging cables, leads etc. Designed to be attached to a flat wall with a single screw.
Parametric OpenSCAD also can be downloaded.
The STL has default parameters designed for use with a 8 guage countersink wood screw.
Inspired by charlespax Cable Hanger thingiverse.com/thing:5383
Parametric OpenSCAD also can be downloaded.
The STL has default parameters designed for use with a 8 guage countersink wood screw.
Inspired by charlespax Cable Hanger thingiverse.com/thing:5383
Instructions
Slice the STL file, and print on your favourite printer. Use 3% to 20% infill depending on how strong you woujld like it and what objects you will be hanging off it. Using 10% is more than strong enough for normal use.
If you would like to modify the size etc, edit the openscad file and re-export a new STL. Countersinking can be enabled and disabled in the .scad source.
If you would like to modify the size etc, edit the openscad file and re-export a new STL. Countersinking can be enabled and disabled in the .scad source.
License
Parametric Cable Hook / Hanger by andygock is licensed under the Attribution - Share Alike - Creative Commons license.
You must be logged in to post a comment.