Volkswagen Cabinet Door Check Strap
by timmmmyboy, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is apparently a part that breaks fairly often on older Volkswagen buses. A coworker of mine has a 1971 Camper and brought in a broken strap to see if I could design a replacement. After playing around with a few different widths we found this one had the best flexibility and tensile strength.
I added mouse ears to one end because I had some issues with curling. They're just 1 layer high and can easily be cut away. To keep things clean I did not add holes to the vertical end since it caused some printing issues and it's much easier to drill to holes later than try to print a vertical hole.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Volkswagen Cabinet Door Check Strap by timmmmyboy is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving timmmmyboy a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure timmmmyboy would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).