Speed sound tester
by charlespax, published
This is something I made ages ago and never published. The extruder of your MakerBot will move in a pattern defined in the gcode generated by a Python script.
You can use this to generate a series of soundes and determine which you like. Then you can find what angle produces that sound.
circles.gcode - A series of circles.
lines.py - A script to generate linear movement along the x-axis. At a feedrate of 3500 the extruder is moved from the origin (0,0,0) to a point n (n,0,0,) along the x-axis, pauses for two seconds, and returns to the origin where it pauses for another two second before moving to the next point. The point n is increased from 0 to 40 mm in steps of 1 mm. The point n is then increased from 40 to 100 in steps of 10 mm. This cycle is then repeated at each feedrate from 3500 to 500 in steps of 200.
lines.gcode - The gcode filecreated by lines.py
movements.dxdf - A series of movements including linesat various angles, arcs, and others.
Liked ByView All
Give a Shout Out
Speed sound tester by charlespax is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving charlespax a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure charlespax would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).