25 mm square aluminium tube joint ball bearing holder
by alisonleanne, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
this is a 22 x 8 x 7 mm ball bearing holder for making a joint with 25 x 25 x 1.2 mm aluminium square tube. drill a 12 mm hole 20 mm from the end of the tube, then push this bearing holder (with the ball bearing in) into the tube.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
25 mm square aluminium tube joint ball bearing holder by alisonleanne is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving alisonleanne a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure alisonleanne would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).