Loading

Improved Z Top Vertex 10mm for MendelMax 1.5

by SG-O, published

Improved Z Top Vertex 10mm for MendelMax 1.5 by SG-O Dec 25, 2012

Description

Top Z Vertex with stabilized lead screw holder.
Works perfect together with Thing:
thingiverse.com/thing:23909

Here is the version for 8mm rods:
thingiverse.com/thing:39172

Recent Comments

view all
I'm going to designe one.
Is it possible to get this for 10mm lead screws? (bearing OD:30mm)
I'm sorry, but this was designed in Autodesk Inventor.

More from 3D Printer Parts

view more

Makes

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Print both parts twice for one MendelMax 1.5

You will also need:

4 * M5 x 20mm screws
12 * M5 x 10mm screws
16 * M5 washers
4 * M5 nuts
2 * 608zz
Is it possible to get this for 10mm lead screws? (bearing OD:30mm)
SG-O - in reply to nully
I'm going to designe one.
if this was created in solidworks can you post the file. Id like to switch the position of the bearing holder to the bottom because this does not work well with specifically cut to length threaded rods.
I'm sorry, but this was designed in Autodesk Inventor.
I printed out one, and found the bearing cup to be several mm larger in diameter than a 608ZZ bearing. Should the 608ZZ fit tightly?
Do you have the same for 8mm rods?
SG-O - in reply to zittix
I will make one.
SG-O - in reply to SG-O
Here it is:
http://www.thingiverse.com/thing:39172
Top