Loading

roller coaster train, mk1212 scale model 1:12,5

by Don1975, published

roller coaster train, mk1212 scale model 1:12,5 by Don1975 Dec 26, 2012

Description

this is going to be a scale model of a Vekoma mk 1212 rollercoaster train. I am building it 1:12.5

Recent Comments

view all
i would love to see that!
The coach was printed without supports.. some treaths wil hang out in the end, but this is easy to remove with some sandpaper.
at the end I smoothed it all with some sprayputty to get a real nice finish..
Did you print the coach with or without supports?

More from Models

view more

Liked By

view all

Tags

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Some parts need to be fine tuned to fit together. I am going to sand it smooth and paint the parts. Several parts, like the main axle (hoofdas) and the two wheelcarrier parts, need to be glued together, for the finished product. To fit the wheels I smooth out the holes with a 3,5 mm drill.

Now I am working on the passenger harnas, and also the front and the tail off the train.
I intend to build a full train, this means a total of 7 coaches, 3 normal frames (1,2,5) 3 chaindog and anti rollback frames (3,4,6) and an end coach.

Yes it is going to be a big model. (about 1,40 m in length)
Do not yet know if I will display the train in a straight, a corckscrew or a loop.

As you can see, tail and nose are done. Nose 2 goes underneath nose 1 and you will have to adjust the body just a little bit to make it fit.

The restraining harnas is also done. Printed it with exterior support.

The coach was printed without supports.. some treaths wil hang out in the end, but this is easy to remove with some sandpaper.
at the end I smoothed it all with some sprayputty to get a real nice finish..
Did you print the coach with or without supports?
Hello Phoxyboy and CitrixCX,
Thanks for liking my model :)
How to put it together is pretty straight forward work..
All the parts wil almost fit together.. So I used a bit of sandpaper to take off some of the rough texture caused by printing..
For the holes I used a drill so it wil fit and run as wel (wheel e.g.)
For the track.. this is plexiglas tubing wich is available in hardware stores.. the ties however, i lasercutted them out.
Think i stil have the dwg drawing for it.. I will put it in the list..
This is GREAT! Do you have the model for the track, as well?
nice fils!
But i want to make it for my own.
do you have a build instruction for the assemby for the car?
i would love to see that!
Top