Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
URover
2
Likes
375
Downloads
604
Views
Published on December 27, 2012
Description
URover is our first underwater project. The chasis is designed to be 100% printable and easy to assemble.
Instructions
We just finished field testing the design (http://www.joc-innovations.com).
Detailed instructions will be uploaded shortly.
For now print the following and secure with super glue:
(1) vertical_nacelle_and_struts
(1) mid_port
(1) mid_bow
(1) mid_stb
(2) horizontal_nacelle
(2) ring
(6) strut
For propullsion we set three mini 3V DC motors in wax into each nacelle
For control we wired 3 toggles to a 12V battery pack and soldered the wires to each motor
We are currently designing the props but for the test we simply trimmed down a set of small RC aircraft props
Detailed instructions will be uploaded shortly.
For now print the following and secure with super glue:
(1) vertical_nacelle_and_struts
(1) mid_port
(1) mid_bow
(1) mid_stb
(2) horizontal_nacelle
(2) ring
(6) strut
For propullsion we set three mini 3V DC motors in wax into each nacelle
For control we wired 3 toggles to a 12V battery pack and soldered the wires to each motor
We are currently designing the props but for the test we simply trimmed down a set of small RC aircraft props
License
More from R/C Vehicles
You must be logged in to post a comment.