Small block for clamping X-Y axis
by Gerrit3D, published
The small plywood blocks for clamping the X and Y axis seemed a bit thin. I drew a quick new one with smal inlay for the nut so the tightening is pretty easy.
Just print scale 1. I did mine with a 0.1 layer thickness and skin option in Cura and they turned out great. There should be a little wiggle room for the nut to fit easily but not to much for tightning the bolt.
Liked ByView All
Give a Shout Out
Small block for clamping X-Y axis by Gerrit3D is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Gerrit3D would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).