Improved Lock Ring
by Jiffies, published
Slightly Longer Pins and an added tab on the back allows this lock ring to better stay in place when opening and closing the cryptex.
Align pins, gently press it downwards. The ABS i use everything flexes enough for it to slip down nicely. Once down give it a gentle twist and it should settle.
Gently twist until rear tab slips out of the notch. One pin should come out of the socket, press the lock ring towards it and the other pin should slide out easily enough. (Simplified: Twist, Wiggle & Pull :)
Liked ByView All
Give a Shout Out
Improved Lock Ring by Jiffies is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Jiffies would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).