PrintrBot Plus Illustrator, PDF, and SVG files
9
Likes
1352
Downloads
2009
Views
Published on December 27, 2012
Derived from
Printrbot Plus
by abdrumm
Description
I wanted to make a printrbot plus using my own tools, but I found the the DXF file did not convert cleanly for cutting on my laser cutter.
This is a 32" x 18" layout of all the parts for the printrbot plus, all overlaps removed, and the colors set for vector cutting / engraving / rastering on a Universal Laser Cutter.
RED is vector
BLUE is vector engraving
BLACK is raster engraving
I have provided renders of the layout as Illustrator, PDF, and SVG. Use your favorite tool to adjust this layout to your own laser cutter and needs.
This is a 32" x 18" layout of all the parts for the printrbot plus, all overlaps removed, and the colors set for vector cutting / engraving / rastering on a Universal Laser Cutter.
RED is vector
BLUE is vector engraving
BLACK is raster engraving
I have provided renders of the layout as Illustrator, PDF, and SVG. Use your favorite tool to adjust this layout to your own laser cutter and needs.
Instructions
Assembly instructions are here:
printrbot.dozuki.com/Guide/Printrbot+Plus/24/1?revisionid=HEAD
12/28/2012
Files were missing the Y-Bar piece, added to the file. Also, I've numbered some of the parts to match the numbers used in the dozuki assembly instructions.
02/07/2013
There was an error on one piece, where the holes did not align. New files have been uploaded that correct this. I've left the old files up with the original date for archival reasons.
printrbot.dozuki.com/Guide/Printrbot+Plus/24/1?revisionid=HEAD
12/28/2012
Files were missing the Y-Bar piece, added to the file. Also, I've numbered some of the parts to match the numbers used in the dozuki assembly instructions.
02/07/2013
There was an error on one piece, where the holes did not align. New files have been uploaded that correct this. I've left the old files up with the original date for archival reasons.
You must be logged in to post a comment.
3DSheffield
on
January 30, 2013
said:
I know this is probably a really numpty question but do you have a file converted to metric. I am trying to cut this out on equipment in our school (UK) and our network throws a fit whenever i try and run any of the CAD software we have to convert the files. Our laserscript seems to only recognise metric .DXF files and tries to cut this the size of a small house. Thank you Dave
License
PrintrBot Plus Illustrator, PDF, and SVG files by martinbogo is licensed under the Attribution - Share Alike - Creative Commons license.
More from 3D Printers
Please let me know the thickness of the sheet...
It has to be exactly 1/4" ... Some Baltic Birch plywood out there comes to that dimension, but check with calipers before purchasing. 6mm plywood is slightly too small.