by IonEwe, published
based on a napikin holder i saw and Lissajous curves: http://en.wikipedia.org/wiki/Lissajous_curve
Depending on your printer you may need a raft or supports. The contact patch on the plate is small. infill on sinecrown4r1 might need to be as much as 75% due to thin walls on the mid section or use sinecrown4r3 which is thicker. sinecrown3r2 has small support to improve stablity.
Liked ByView All
Give a Shout Out
SineCrown by IonEwe is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving IonEwe a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure IonEwe would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).