Loading

Dice Tray

by Bible9230, published

Dice Tray by Bible9230 Dec 27, 2012

Description

This is an excellent way to keep your dice in one easy-to-read location without causing havoc on your carefully set up game board. 7.5 L x 5.5 W x 1.5 H

Recent Comments

view all
Yes, I have a 4 second delay between layers and the leapfrog creatr nozzle cooler by zabana thing:47086 . Between those two, PLA prints great on my creatr, even with thin walls.
Did you use any cooling on it?
Printed great with PLA on my Creatr, thanks for the design!

More from Dice

view more

Makes

Liked By

view all

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

This is a large based part so there is a possibility of warping. I highly recommend covering the unit to keep the part warm to prevent the plastic from cooling too quickly while printing.
Printed great with PLA on my Creatr, thanks for the design!
Did you use any cooling on it?
Yes, I have a 4 second delay between layers and the leapfrog creatr nozzle cooler by zabana thing:47086 . Between those two, PLA prints great on my creatr, even with thin walls.
Top