by byllc, published
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/amMY4GkOvGA
Made to fit my Calphalon pots and pans but I was able to hang a few other pots up.
I had to print them at least 30% infill to be strong enough to support my pans. They snap right over a 1" chrome bar and are not easy to remove once in place. They are holding up fine but I'm probably going to try a few different designs.
The early prints weren't strong enough and the hook snapped off so I just drilled a hook into the bottom of them and used them for light items. I've added an image of this. Once i upped it to 30% infill they hold up great.
Liked ByView All
Give a Shout Out
Pot Hook by byllc is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving byllc a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure byllc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).